Availability: | |
---|---|
Quantity: | |
Sliced Cut Paulownia Veneer is a type of veneer produced using a specific cutting method. Let's delve into the details:
Crown Cut (Tangential Cut):
This method involves slicing along the growth rings of the log.
The resulting veneer exhibits a pattern characterized by straight grain intermixed with cathedrals.
Crown-cut veneers retain the natural structure of the timber.
Commonly used for various wood species.
Quarter Cut:
Similar to plain-sliced veneer, the log is first cut into quarters before slicing.
This method bisects the annual growth rings, resulting in a straight grain or ribbon-striped appearance (resembling Mahogany).
Due to the lower yield from the log, a quarter-cut veneer is usually more expensive.
Walnut, Mahogany, Oak, and Teak are commonly used for this cut.
Rotary Cut:
Manufactured by advancing a rotating log against a stationary knife.
The cut follows the log's annual growth rings, producing a wide, bold grain pattern.
A rotary-cut veneer is cost-effective and used for Birch, Maple, and Oak.
Rift Cut:
Obtained by fixing a quarter-log on the stay log.
Results in veneer with a striped grain or half-cathedral appearance.
Primarily used in American woods.
The rift-cut method yields the least amount of veneer and is therefore the most expensive.
In summary, Paulownia veneer can be sliced using various methods, each yielding distinct visual effects. Whether you're aiming for straight grain, bold patterns, or cathedral-like features, the choice of cut plays a crucial role in creating beautiful wood surfaces.
Sliced Cut Paulownia Veneer is a type of veneer produced using a specific cutting method. Let's delve into the details:
Crown Cut (Tangential Cut):
This method involves slicing along the growth rings of the log.
The resulting veneer exhibits a pattern characterized by straight grain intermixed with cathedrals.
Crown-cut veneers retain the natural structure of the timber.
Commonly used for various wood species.
Quarter Cut:
Similar to plain-sliced veneer, the log is first cut into quarters before slicing.
This method bisects the annual growth rings, resulting in a straight grain or ribbon-striped appearance (resembling Mahogany).
Due to the lower yield from the log, a quarter-cut veneer is usually more expensive.
Walnut, Mahogany, Oak, and Teak are commonly used for this cut.
Rotary Cut:
Manufactured by advancing a rotating log against a stationary knife.
The cut follows the log's annual growth rings, producing a wide, bold grain pattern.
A rotary-cut veneer is cost-effective and used for Birch, Maple, and Oak.
Rift Cut:
Obtained by fixing a quarter-log on the stay log.
Results in veneer with a striped grain or half-cathedral appearance.
Primarily used in American woods.
The rift-cut method yields the least amount of veneer and is therefore the most expensive.
In summary, Paulownia veneer can be sliced using various methods, each yielding distinct visual effects. Whether you're aiming for straight grain, bold patterns, or cathedral-like features, the choice of cut plays a crucial role in creating beautiful wood surfaces.