Selection criteria for veneer edge banding

Nowadays, veneer furniture is more and more widely used. The use of natural veneer composite furniture not only has the effect of solid wood, but also saves a lot of costs. In order to achieve the effect of solid wood in the production process of solid wood composite furniture, veneer edge banding plays a great role. The veneer edge banding can play an important role in beautifying the edges of furniture and protecting the furniture. However, improper protection of veneer edge banding can also cause furniture deformation and delamination.

picture

　　1. Good flexibility, even if it is sealed on a sheet with a small radius, it will not break. Its edge-sealing gap is very small, and there are basically no gaps in sight, and the edge-sealing strip and the cabinet body are particularly airtight.

　　2. The edge banding strip has good dimensional stability and will not shrink or expand excessively due to large temperature differences.

3. Look at the hue and surface roughness of the veneer edge banding. The color of the surface of the good veneer edge banding is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are scratches, the quality is definitely not much better. This is the surface quality of the veneer edge banding. This has nothing to do with the quality of the internal material of the veneer edge banding. It is mainly the veneer edge banding manufacturer. The production technology and the production technical skills of the employees. Good veneer edge banding strips are: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).

4. Look at the flatness of the surface and bottom of the veneer edge banding, and whether the thickness is uniform, otherwise it will cause the joint between the veneer edge band and the board, the glue line is too eye-catching or the gap between the board and the veneer edge band is too large to affect the overall The beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.

　　5. Whether the strength of the veneer edge banding is okay and whether it is elastic. High strength means good abrasion resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, it is generally necessary to manually trim the edges, and the soft points can be appropriately made, and the automatic edge banding machine can appropriately make the hard points.

　　6. Whether the adhesive of the veneer edge banding strip is evenly applied, and whether it is easy to fall off during use.