Email: linyiyuping@hotmail.com | WhatsApp | Mobile: +86 15605390885
English 
| Quantity: | |
|---|---|
Abrasive Tools · Application-Based Selection
Zirconia alumina flap discs for stock removal, weld blending, deburring and surface preparation. Specifications are matched to the workpiece, grinder and required finish.
Blue zirconia flap discs combine zirconia alumina abrasive grains with overlapping coated-abrasive flaps. The construction supports material removal and surface blending in a single operation when the disc specification and operating method are correctly matched.
They are typically considered for fabrication and maintenance work on compatible carbon steel, stainless steel and selected alloys. Final suitability depends on the workpiece grade, surface condition, grinder, required finish and applicable safety requirements.
Specification note: Product dimensions, grit availability, backing, flap density and packaging should be confirmed in the quotation or order document. Safety-critical parameters must be checked on the product and packaging.
Grinding & Stock Removal | Removal of excess metal and preparation of compatible fabricated parts. |
Weld Blending | Blending weld beads and transitions where removal and surface control are both required. |
Deburring & Edge Preparation | Removing burrs and refining cut or machined edges. |
Rust, Scale & Coating Removal | Preparing compatible surfaces before repair or refinishing. |
Surface Preparation | Preparing metal before painting, coating, inspection or further finishing. |
Item | Selection Guidance | Information to Provide |
|---|---|---|
Disc diameter | Match the approved grinder and access area. | Required diameter in millimetres or inches. |
Bore or mounting | Confirm spindle, flange and accessory compatibility. | Bore size or mounting type. |
Grit | Coarser for higher removal; finer for blending and smoother finish. | Requested grit or target finish. |
Disc profile | Type 27 is flat; Type 29 is conical. | Preferred profile and working angle. |
Backing | Options depend on construction and application. | Required backing, if specified. |
Packaging | Inner and export packaging are confirmed with the order. | Quantity, labelling and destination. |
Identify the workpiece: Record the metal grade, surface condition and contamination restrictions.
Define the operation: Separate stock removal, weld blending, deburring and finishing requirements.
Choose the grit: Balance the required removal rate against the target surface finish.
Select the profile: Choose flat or conical construction for the contact angle and geometry.
Verify the tool: Confirm mounting, guard, accessories and marked operating-speed limits.
Coarse grit | Typically selected for faster stock removal, weld cleanup and heavy surface preparation. Expect a more pronounced scratch pattern. |
Medium grit | Often used for general grinding, deburring and blending where removal and finish must be balanced. |
Fine grit | Typically selected for lighter blending and a smoother surface before coating or another finishing step. |
For a specified scratch pattern or coating-preparation standard, test the proposed grit on the actual workpiece before a production order.
Type 27 — Flat profile: Commonly selected for lower working angles, broader contact and surface blending.
Type 29 — Conical profile: Often selected when a more concentrated contact area is useful for material removal or access.
Confirm the correct grinder, mounting, contact angle and operating method for the selected disc.
Disc diameter and bore
Requested grit or target finish
Type 27 or Type 29 profile
Backing requirement, if specified
Workpiece material and grade
Main operation
Grinder or speed information
Quantity, packaging and destination
Inspect the disc, backing and packaging before use. Do not use a damaged, wet or incorrectly specified disc.
Match the diameter, bore and marked maximum operating speed to the approved grinder and accessories.
Use the correct guard, flange and personal protective equipment.
Follow the grinder manufacturer instructions, abrasive-product instructions and workplace safety rules.
Store discs in their original packaging in a clean, dry area away from moisture, impact and extreme temperature changes.
Provide the diameter, bore, grit, profile, workpiece, operation, quantity, packaging requirement and destination.
Coarser grits are generally selected for faster removal; finer grits are selected for blending and a smoother finish. Confirm the choice against the workpiece and target surface.
They are commonly used for compatible stainless-steel grinding and weld blending. Confirm suitability for the stainless grade and use dedicated tools and abrasives to reduce cross-contamination risk.
Keep them in their original packaging in a clean, dry area away from moisture, impact and extreme temperature changes.
Send your grinder, workpiece, operation, size, bore, grit, profile, quantity and destination. Linyi Yuping will confirm available options, packaging and commercial terms.
