PRODUCTS

You are here: Home » Products » Abrasive Tools » Vitrified Chainsaw Sharpening Grinding Wheels — Pink PA Abrasive

Grinding Chainsaw Wheel/Chain Sharpening Grinding Wheels(motosega catena affilatrice mola)

Vitrified Chainsaw Sharpening Grinding Wheels — Pink PA Abrasive

Turn any standard electric grinder into a professional chainsaw sharpener — razor-sharp chain in minutes, without paying for shop sharpening.

Quantity:
Availability:





Inquire Add to Basket

Model:
PA-CSW-100
Code:
680422

Product Description

Chainsaw Maintenance · Product & Buyer Guide

Vitrified Chainsaw Chain Sharpening Grinding Wheels

Pink PA vitrified grinding wheels for compatible electric chainsaw chain sharpeners. Available in selected 100/105 mm diameters, 3.2–4.8 mm wheel thicknesses and multiple bore or grit options—each specification must be matched to the sharpener and chain before use.

100 / 105 mm diameter 3.2 / 4.7 / 4.8 mm Pink PA abrasive 60 / 80 / 120 / 220 grit Wholesale & OEM supply

Pink vitrified grinding wheels for electric chainsaw chain sharpeners

100/105 mm Wheel diameter

3.2–4.8 mm Wheel thickness

PA Vitrified abrasive

60–220 Grit range

Actual grinding wheel and sharpening application

Chainsaw chain being sharpened on an electric chain grinder with a pink wheel

Installed on a compatible guarded chain sharpener Multiple pink chainsaw sharpening grinding wheels on a white background

Product range and wheel profiles Close-up showing thickness and edge profile of pink vitrified grinding wheels

Wheel thickness and edge-profile detail Single pink chainsaw grinding wheel displayed vertically

Side profile and centre-bore reference

Actual product photos are shown for construction and application reference. Label artwork, colour tone and supplied dimensions may vary by model; verify the marked specification and approved sample before ordering or installation.

Purpose-built for compatible chain-sharpening machines

These bonded abrasive wheels are designed to dress and sharpen chainsaw cutter teeth on a suitable electric chain grinder. A correct wheel selection helps the operator reproduce the chain manufacturer's specified top-plate angle, side-plate profile and depth of grind with controlled material removal.

Defined wheel profiles

Multiple thicknesses support different cutter geometries when matched to the chain and sharpener setup.

PA vitrified construction

Pink aluminium-oxide abrasive with a vitrified bond is selected for controlled grinding and dressable wheel geometry.

Production-ready options

Diameter, bore, thickness, grit, label and packing can be confirmed for replacement, wholesale and OEM programmes.

Available specifications

Wheel specification	Typical selection	Buyer confirmation
1F — 100/105 × 3.2 mm	Thin-profile chain-sharpening applications	Confirm bore: 10, 16 or 22.2 mm as required
1F — 100/105 × 4.7 mm	Wider cutter-profile applications	Commonly supplied with 22.2 mm bore; verify machine
1F — 100/105 × 4.8 mm	Wider cutter-profile applications	Commonly supplied with 22.2 mm bore; verify machine
Abrasive / bond	Pink PA aluminium oxide / vitrified bond	Confirm complete wheel marking and material designation
Grit options	60, 80, 120 and 220	Choose according to cut rate, finish and chain material
Hardness designation	70 supplier designation	Confirm test method or internal standard before comparison
Maximum operating speed	As marked on the exact wheel	Must meet the sharpener speed without exceeding the wheel rating
Other models	Selected 145 mm configurations may be available	Send full dimensions and machine details for confirmation

Dimension order: specify outside diameter × wheel thickness × bore in millimetres. Do not order by colour or nominal inch thickness alone; two wheels that look similar may use different bores, profiles, bonds or speed ratings.

How to select the correct chainsaw grinding wheel

1. Identify the sharpener

Send the machine brand, model, wheel guard capacity, spindle or flange arrangement and no-load speed.

2. Measure the wheel

Confirm outside diameter, thickness and centre bore from the original wheel or machine manual.

3. Identify the chain

Provide chain brand, model, pitch, gauge, cutter type and the manufacturer's sharpening specification.

4. Select the grit

Balance material-removal rate, heat control, finish and dressing frequency using a production-representative test.

5. Confirm the profile

The dressed wheel edge must match the required cutter geometry; profile is not determined by thickness alone.

6. Define the order

State quantity, model mix, labels, inner packing, carton marks, destination and required documents.

Controlled sharpening workflow

Stage 01

Inspect

Check the chain, wheel, guard, flanges and mounting surfaces. Do not use damaged components.

Stage 02

Set

Set the grinder angle, chain stop and depth according to the chain manufacturer's instructions.

Stage 03

Grind

Use light, repeatable passes and avoid prolonged contact that can overheat the cutter.

Stage 04

Verify

Check cutter consistency, wheel condition and depth gauges using the specified chain-maintenance method.

Applications and customer groups

Sharpening workshops

Replacement wheels and mixed specifications for chainsaw service and repair businesses.

Forestry and arborist supply

Consumable wheel programmes for professional chain maintenance and equipment dealers.

Hardware wholesalers

Retail-ready or bulk packing for tool, forestry and garden-machinery distribution.

OEM/private label

Custom labels and packing can be reviewed against quantity, artwork and market requirements.

Chain manufacturers

Wheel selection and sample testing for defined chain families and cutter profiles.

Maintenance departments

Planned replacement supply for compatible guarded chain-sharpening equipment.

Safety and operating guidance

Use the wheel only on a compatible, guarded chainsaw chain sharpener—not on a handheld angle grinder unless the wheel and machine are expressly approved for that use.
Confirm wheel diameter, thickness, bore, flange fit and maximum operating speed before mounting. Never exceed the speed marked on the wheel.
Inspect for cracks, edge damage, moisture exposure or transport damage. Do not mount a questionable wheel.
Mount with clean, correct flanges; do not force the bore, overtighten the nut or modify the wheel.
Stand clear during startup, keep the guard closed and use suitable eye, face, hearing and respiratory protection.
Use light passes and allow cooling. Excessive pressure or dwell can overheat cutter teeth and damage the wheel.
Dress only with the approved dressing tool and method, and follow the machine, wheel and chain manufacturers' instructions.

Frequently asked questions

Will this wheel fit any electric grinder?

No. It is intended for compatible guarded chainsaw chain sharpeners. Verify the machine model, permitted diameter, wheel thickness, bore, flange system, guard and speed rating before ordering or use.

Which wheel thickness should I choose?

Choose the thickness and dressed profile specified by the chain or sharpener manufacturer. The available 3.2, 4.7 and 4.8 mm options serve different cutter geometries; chain pitch alone may not be enough to select safely.

What do 60, 80, 120 and 220 grit change?

Coarser grits generally cut faster, while finer grits can provide a more refined result. Actual performance depends on the abrasive, bond, chain material, pressure, dressing and machine speed, so test the selected wheel under controlled conditions.

Can it sharpen every type of chainsaw chain?

Do not assume universal compatibility. Send the chain model, pitch, gauge, cutter type and manufacturer-recommended sharpening geometry so the wheel dimensions and profile can be checked.

How can I prevent cutter overheating?

Use a correctly dressed wheel, light repeatable passes, suitable grit and controlled contact time. Avoid forcing the cutter into the wheel, and allow cooling between passes when required.

Are OEM labels and wholesale packing available?

OEM options may include wheel labels, inner packing and carton marks. Send the exact dimensions, grit, quantity, artwork, destination and compliance requirements so MOQ, sample availability, lead time and pricing can be confirmed.

Need a chainsaw grinding wheel quotation?

Send the sharpener model, wheel dimensions, chain specification, grit, quantity, packing and destination for compatibility confirmation and pricing.

Enquire on WhatsApp