| Quantity: | |
|---|---|
1220*2440mm
Engineered entirely from birch veneers — no mixed species, no compromises. Cross-grain construction for superior strength, dimensional stability, and a clean surface finish trusted by furniture makers, builders, and architects worldwide.
Cross-grain veneer orientation locks each layer in tension against the adjacent one. The result is a panel that resists bending, splitting, and deformation under heavy static and dynamic loads — outperforming MDF, particleboard, and standard softwood plywood.
Alternating grain directions neutralize the natural tendency of wood to expand along the grain. Full birch panels maintain flat, square geometry through seasonal humidity and temperature changes — essential for precision joinery and cabinet work.
Birch's fine, uniform grain produces a smooth, paintable face that takes stain, lacquer, and veneer finishes evenly. Grade A panels are near-knot-free — a top choice for visible furniture surfaces, decorative wall panels, and high-end cabinetry interiors.
From roofing sheathing to wardrobe carcasses, full birch plywood performs across the full spectrum. Multiple grade options let engineers and designers specify the right cost-performance balance for every layer of a build.
Only top-grade birch logs with uniform texture, consistent grain, and correct moisture content are accepted into production.
Logs are processed on precision rotary lathes into ultra-thin, consistent veneer sheets. Thickness and smoothness are tightly controlled.
Veneers are oven-dried to optimal moisture levels, then sorted by thickness, density, and visual quality for face, back, or core use.
Adhesive-coated veneers are stacked in alternating grain directions — the structural foundation of plywood's dimensional stability.
Panels are bonded under high heat and pressure, then trimmed, sanded, and surface-finished to a precise, ready-to-use standard.
A specialized waterproof variant engineered for high-moisture and outdoor environments. 100% birch veneers, bonded with WBP (Weather & Boil Proof) adhesive — superior resistance to delamination and structural degradation in wet conditions.
Resists constant moisture exposure without delaminating or losing structural rigidity. Approved for hull, deck, and interior panel applications in marine environments.
Withstands seasonal rain, humidity cycles, and temperature extremes — far outperforming standard plywood in outdoor cladding, decking, and landscaping structures.
Suitable for bathroom, kitchen, and wet-area installations where standard interior-grade panels would swell or fail within months of installation.
Our marine plywood uses Weather & Boil Proof (WBP) adhesive, the highest waterproof bonding standard in the industry. Full test documentation available for specification and compliance.
Linyi's established supply chains ensure a stable, year-round flow of premium birch logs — eliminating production gaps and maintaining consistent panel quality across high-volume orders.
Factories operate precision rotary lathes, climate-controlled drying chambers, and high-tonnage hot presses — producing veneer and panel quality that matches European and North American manufacturing standards.
Linyi's plywood industry spans three decades. Skilled technicians with deep knowledge of veneer grading, gluing, and pressing are embedded throughout the production process — a resource that cannot be replicated quickly elsewhere.
Lower production and logistics costs translate directly into globally competitive FOB pricing. Importers, distributors, and furniture manufacturers worldwide source from Linyi to maintain margin without sacrificing panel quality.
What is 100% full birch plywood, and how does it differ from birch-faced plywood?
Full birch plywood uses birch veneers throughout every layer — face, back, and all cores. Birch-faced plywood uses birch only on the outer face, with cheaper poplar or eucalyptus cores. Full birch delivers higher strength, better screw-holding, and superior dimensional stability.
What grade should I specify for kitchen cabinetry?
For visible interior panels and door faces, Grade A or B is recommended. For structural carcass panels that will be laminated or painted, Grade B or C provides the best cost-performance balance.
What is birch marine plywood, and when do I need it?
Marine plywood is bonded with WBP (Weather & Boil Proof) adhesive to prevent delamination in wet or humid environments. Specify marine grade for boat building, bathroom paneling, outdoor furniture, and any application with regular moisture exposure.
Can I order custom thicknesses or sheet sizes?
Yes. We manufacture to custom thicknesses (from 3mm up to 30mm+) and panel sizes. Share your production line requirements and we will provide an OEM specification and pricing quote.
What formaldehyde standards does your adhesive meet?
Our standard panels meet E1 (European indoor air quality). E0 and CARB Phase 2 (California) compliant panels are available on request — suitable for USA and EU market requirements. Test reports provided with order documentation.
What are typical lead times and minimum order quantities?
Standard MOQ is one 20' GP container. Production and shipment lead times vary by grade and specification — contact our team for a firm timeline based on your order details. Free physical samples are available prior to bulk order.
Request a free sample, discuss custom specifications, or get a bulk export quote from our team in Linyi.
