Email: linyiyuping@hotmail.com | WhatsApp | Mobile: +86 15605390885
English 
| Quantity: | |
|---|---|
Perforated / non-perforated; sizes by order
Dry veneer tape is used to hold, align or repair veneer sheets during plywood, door-skin, furniture and decorative-panel production. Perforated and non-perforated constructions are available for different joining and handling requirements. Final suitability should be checked with the buyer’s veneer species, moisture level, pressing process and finishing method.
Specification note: Width, thickness, paper construction, adhesive grade, roll length and colour are supplied according to the confirmed quotation and approved sample.
| Perforated tape | Selected when the buyer requires a perforated paper construction for a specific jointing or repair process. Hole pattern and tape dimensions should be confirmed by sample. |
| Non-perforated tape | Selected for continuous surface contact, positioning, protection or repair where perforation is not required. |
The construction alone does not determine performance. Activation, tack, drying, pressing, sanding and removal behaviour must be tested under actual production conditions.
Widths such as 10 mm, 15 mm or 20 mm
Roll lengths such as 300 m, subject to product construction
Perforated or non-perforated paper
Required thickness and colour
Standard or higher adhesive strength
These are inquiry examples, not universal stock specifications. Availability, minimum order quantity and production lead time are confirmed for each quotation.
Joining veneer sheets before panel lay-up or pressing
Repairing splits and reinforcing local weak areas
Maintaining alignment during handling and assembly
Supporting veneer preparation for plywood, furniture panels and door skins
Before mass production, approve a sample and test roll appearance, width and thickness tolerance, usable roll length, unwind, activation method, initial tack, drying time and joint holding. Also check sanding or removal, surface residue, staining and coating compatibility where relevant.
| Tape construction | Perforated or non-perforated |
| Dimensions | Width, thickness and metres per roll |
| Adhesive | Activation method and required tack |
| Application | Veneer species, thickness and production process |
| Quantity | Estimated rolls or total weight |
| Logistics | Packing, destination port and trade term |
Samples, MOQ, lead time, packing and available certifications are confirmed against the selected specification. Repeat orders should reference the approved sample and specification sheet.
Send the required tape type, width, roll length, quantity and destination port for a quotation.
