| Quantity: | |
|---|---|
640x2500mm, 64x3600mm
Premium reconstituted veneer engineered for perfect consistency — no knots, no color variation, no surprises. Walnut, Oak, Teak, Maple, Rosewood, Ebony and specialty designer finishes. The surface material trusted by luxury furniture and interior fit-out projects worldwide.
WALNUT 293N
RED CLOUD MAPLE
S. APRICOT 792C
WALNUT 1953S
RAINBOW 2810S
OAK 7007C 
WALNUT 7302S
FALL LEAF 40C
ZABRA 115S
FALL LEAF 609S
PURPLE ROSE 208S
GREY CLOUD MAPLE
The recomposition process eliminates all natural defects — knots, splits, pin holes, and color streaks. Every sheet arrives consistent and production-ready, reducing waste and rework on the shop floor.
Veneers are dyed before reassembly, locking in rich, consistent color that doesn't vary between sheets, bundles, or batches. Essential for large wall panels and matched furniture sets where color continuity is non-negotiable.
Core species — Ayous, Poplar, and Basswood — preserve the natural cellular structure of wood. After re-slicing, each sheet carries genuine wood grain lines, not a printed or film pattern, delivering tactile authenticity alongside visual uniformity.
From single decorative panels to full hotel lobby fit-outs, engineered veneer scales without visual compromise. Available in straight, quarter-cut, and book-match-style patterns to suit any layout and architectural requirement.
Fast-growing, structurally consistent species — Ayous, Poplar, or Basswood — are selected for their uniform density and clean grain, forming the ideal substrate for dyeing and recomposition.
Logs are peeled into ultra-thin veneer sheets, then immersed in precision color baths. Penetrating dye saturates the full thickness of each sheet, ensuring color uniformity on the final cut surface.
Dyed sheets are stacked in a controlled sequence that mimics the desired grain pattern — straight, wavy, or figured. The stack is glued and hot-pressed into a dense, solid block under high heat and pressure.
The compressed block is sliced again at precise angles to reveal the finished veneer. The cut surface exposes the dyed grain in its final, consistent pattern — ready for backing, splicing, or direct application.
ROSEWOOD 830C 
WALNUT 1456S
ROSEWOOD 830S
ROSEWOOD 810C
WALNUT 2108C
BAMBOO NET
EBONY B06S
WALNUT 1955C
TEAK 014C
WALNUT 5C
WALNUT 1953C
OAK 08N
Rich espresso tones, from warm amber-brown to deep charcoal-brown. The defining species for luxury furniture and executive interiors.
Timeless honey and blonde tones with pronounced medullary rays. Classic and contemporary in equal measure.
Bold, non-standard colorways that make Maple a statement species for contemporary and avant-garde interiors.
Warm golden-brown with rich interlocked grain — the classic tropical hardwood aesthetic, reproduced with perfect consistency.
Deep, dramatic species codes for high-contrast luxury interiors and statement furniture pieces.
Ash, Bamboo Net, Rainbow, Purple Rose, Smoke, Fall Leaf, and Apricot — for bespoke projects that demand a unique palette.
THAI TEAK 203S
S. APRICOT 792S
WALNUT 4008S
SMOKE 4522S
OAK 06N
WALNUTF 2111C
WALNUT 322S
PURPLE ROSE 308C
N. EURO WALNUT 228S
W. OAK 092S
OAK 101S 
W. OAK 020S
W. OAK 024S 
US W. OAK A118S
ASH 5400S
| Property | Natural Wood Veneer | Engineered Wood Veneer |
|---|---|---|
| Color Consistency | ✗ Varies sheet to sheet | ✓ Uniform across entire order |
| Knots & Natural Defects | ✗ Present — reduce yield | ✓ Eliminated in recomposition |
| Large-Format Matching | ✗ Difficult — limited log size | ✓ Scalable, repeatable across panels |
| Grain Authenticity | ✓ True natural grain | ✓ Real wood grain, uniform pattern |
| Exotic Species Availability | ✗ Scarce & expensive | ✓ Mimics endangered species sustainably |
| Production Waste | ✗ High — defects rejected | ✓ Low — consistent yield per sheet |
| Custom Color / Pattern | ✗ Limited to natural range | ✓ OEM custom dyeing available |
Tables, cabinets, wardrobes, and seating where surface appearance is the primary value driver. Consistent grain eliminates the visual randomness of natural veneer across multiple pieces in a collection.
Door fronts, drawer faces, and carcass panels that must match across an entire kitchen run. Engineered veneer ensures color continuity from first cabinet to last, regardless of batch or delivery timing.
Large-format architectural panels where seam-to-seam color matching is critical. Hospitality, retail, and corporate fit-outs specify engineered veneer precisely for this reason.
Guest rooms, lobbies, and F&B spaces requiring hundreds of matching panels across months of phased installation. Engineered veneer eliminates the color drift that occurs when natural veneer orders span multiple log batches.
Specialty codes like Rainbow, Purple Rose, and Bamboo Net open colorways unavailable in any natural species — enabling designers to specify wood surfaces in palettes that would be impossible with natural veneer.
Rosewood, Ebony, and Teak face tightening international trade restrictions as endangered species. Engineered veneer delivers their visual character from legal, fast-growing core species — eliminating CITES compliance risk.
What is engineered wood veneer, and how is it different from natural veneer?
Engineered veneer is remanufactured from dyed, reassembled wood blocks — not sliced directly from a log. The process eliminates natural defects and produces perfect sheet-to-sheet color and grain consistency, which natural veneer cannot guarantee.
What core species are used as the base wood?
We use fast-growing, sustainably sourced species — Ayous, Poplar, and Basswood — as the core substrate. These species have consistent density and cellular structure that accept dye penetration uniformly, forming the foundation of a reliable engineered veneer.
Can I order a custom color or grain pattern not in the standard range?
Yes. OEM custom colorways are available for volume orders. Share your target color reference (RAL, Pantone, or physical sample) and our team will develop a matched engineered veneer to specification.
What backing options are available for engineered veneer sheets?
Sheets can be supplied unbacked, or backed with paper, fleece (non-woven), or self-adhesive film depending on your production process. Contact us to specify the backing appropriate for your press or hand-lay application method.
Is engineered veneer suitable for curved or formed surfaces?
Yes. Engineered veneer can be produced in standard thicknesses (0.3mm–0.6mm) that flex sufficiently for gentle curves in cold-press applications. For tight radius forming, discuss your geometry with our technical team before specifying.
How do I request samples?
Contact us via WhatsApp, WeChat, or phone at +86-15605390885. Specify which style codes interest you and we'll arrange a physical sample pack. We recommend ordering samples before committing to bulk quantities for color-critical projects.
Request a sample pack, ask about custom colorways, or discuss volume pricing with our team. Physical samples dispatched within 2 business days.
Phone · WeChat : +86-15605390885
