Actual veneer sheets and grain appearance
Photos show actual veneer under factory lighting. Screen settings, lighting and natural wood variation can affect perceived colour; approve a physical reference sample for colour-sensitive orders.
Warm-toned eucalyptus veneer for decorative and panel applications
This eucalyptus wood veneer is selected for projects that need a light natural hardwood appearance with repeatable commercial supply. The photographed lot shows pale cream, beige and subtle pink tones with generally straight to softly flowing grain. Colour, figure and natural characteristics vary between logs and production lots, so approved samples and written grade limits are important for visible surfaces.
Product specifications
| Item | Current product information | Buyer confirmation |
|---|---|---|
| Commercial name | Rose Eucalyptus veneer / Red Grandis veneer | Confirm botanical species and accepted trade name for the order |
| Veneer use | Decorative face veneer or inner/core veneer | State the finished panel construction and end use |
| Face thickness | Typically 0.2–0.6 mm | Nominal thickness and tolerance confirmed by order |
| Core thickness | Typically 1.0–2.0 mm+ | Final range and tolerance depend on production specification |
| Processing | Natural or dyed; rotary-cut or sliced options | Confirm cut method, colour standard and matching requirement |
| Appearance | Photographed lot: pale cream to soft pink tones with generally straight to flowing grain | Natural variation is expected; approve a representative sample |
| Grade | Face and core selections; A/B/C terminology may be used | Grade names are supplier-specific—agree permitted defects in writing |
| Origin | Plantation-grown supply may be available from multiple regions | Country of origin and supporting documents confirmed per lot |
| Sheet size | Produced to available log and order requirements | Specify minimum length, width, jointing and bundle requirements |
| Moisture content | Controlled for packing and intended processing | Target and tolerance confirmed before production |
Face veneer or core veneer: which should you choose?
Typical applications
| Application | Recommended selection focus | Details to provide |
|---|---|---|
| Furniture and cabinetry | Face grade, colour range, grain matching and finishing compatibility | Component size, substrate, finish system and visual standard |
| Interior doors | Sheet length, symmetry, jointing and surface quality | Door size, matching pattern, pressing process and finish |
| Wall and ceiling panels | Panel-to-panel consistency and installation environment | Coverage, panel dimensions, fire or emission requirements |
| Skirting and decorative trim | Long-grain appearance, narrow-width yield and wrapping quality | Profile, width, length, adhesive and finishing process |
| Plywood and laminated panels | Thickness, moisture, dimensions and permitted core defects | Lay-up, panel standard, adhesive system and performance target |
Quality points to confirm before ordering
Handling, storage and production guidance
Keep veneer flat, dry, supported and protected from direct sunlight, rain and rapid humidity changes.
Allow packaged material to condition under controlled factory conditions before pressing or finishing.
Test the selected adhesive, pressing cycle, substrate and coating system on production-representative samples.
Inspect colour and grain under the project lighting before cutting or jointing visible faces.
Use appropriate dust extraction and personal protective equipment during sanding, cutting and machining.
Follow local rules and the adhesive or coating manufacturer's instructions for workplace safety and emissions.
Wholesale and OEM inquiry checklist
Send the following information for a more accurate product recommendation and quotation:
