linyiyuping@gmail.com +86-15605390885
English 
| Quantity: | |
|---|---|
0.3mm*1250*2500mm 4'x6,4‘x8'
4408901999
Core Product Advantages
A rare balance of natural beauty, physical performance, eco-compliance, and cost efficiency.
Heartwood naturally ranges from romantic pink to red-brown, with straight to gently interlocked grain and a silky surface luster.
Dense wood structure gives a smooth, flat surface that saves adhesive, plus strong toughness, wear resistance, and moisture resistance. Dimensionally stable once dried — resists cracking and warping.
When pressed with soy-based or MDI formaldehyde-free adhesives, it meets ENF-grade eco standards for high-end engineered and plywood panels.
Abundant plantation supply makes it a highly cost-effective alternative to rare hardwoods like cherry, sapele, and walnut.
| Type | Detail |
|---|---|
| Natural / Dyed Face Veneer | 0.2mm – 0.6mm — surface facing for furniture, doors, wood trim & wall panels |
| Structural / Core Veneer | 1.0mm – 2.0mm+ — core layers for plywood & multi-layer board, adds load-bearing strength & screw-holding power |
| Grade | Detail |
|---|---|
| A / B Grade | Face grade — no dead knots, no cracks, no decay, uniform color; for visible decorative surfaces |
| C Grade & below | Core grade — small natural knots allowed; used as internal substrate layers |
Primary Applications
New Chinese-style furniture, light-luxury wardrobe doors, and cabinet facing — typically used as a premium solid-wood-look veneer skin.
Parquet-style door facing, skirting boards, and ceiling or wall decorative molding where a high-end appearance is required.
A premium full-core veneer for high-density multi-layer board and paint-free eco boards.
Also known as Red Grandis veneer, it's a thin wood veneer rotary-cut or sliced from Eucalyptus heartwood, typically sourced from plantations in South America (Brazil, Uruguay) or Australia — widely used as a cost-effective alternative to rare hardwoods.
When pressed with soy-based or MDI formaldehyde-free adhesives in high-end manufacturing, it can meet ENF-grade eco-friendly standards for engineered and plywood panels.
Face veneer (0.2mm–0.6mm) is a decorative surface layer for furniture, doors, and wall panels. Core veneer (1.0mm–2.0mm+) is used as structural inner layers in plywood, adding load-bearing strength and screw-holding power.
A/B grade is face-grade veneer with no dead knots, cracks, or decay and uniform color. C grade and below is core-grade veneer that may include small natural knots, used as internal substrate layers.
Common applications include high-end custom furniture, wardrobe and cabinet door facing, interior wood doors, skirting boards, decorative trim, and core veneer for high-density plywood and paint-free eco boards.
Request samples, grading details, or bulk pricing for Rose Eucalyptus (Red Grandis) veneer — face or core, any thickness.
